Stainless Steel Pipe

Hyde is one of leading Manufacturers & Comprehensive Suppliers in the line of Metal Materials Tubing Stainless Steel Pipe for applications of Heat Exchanger, Chemical and Petrochemical Industry, Pharmaceutical Industry, Marine Industry and Power Industry etc.

  • Austenitic Stainless Steel Pipe

Austenitic Stainless Steel Pipe



Austenitic Stainless Steel Pipe






Outer Diameter

DN10~DN1200, 3/8"~100",6mm~2500mm

Wall Thickness

1mm~150mm( SCH5S,10S,10,20,30,40S,STD,40,60,80S,XS,



5.8m,6m,12m or as required.


a) General service industries (petroleum, food, chemical, paper,

fertilizer, fabric, aviation and nuclear)
b) Fluid, gas and oil transport
c) Pressure and heat transmission
d) Construction and ornament
e) Boiler heat exchangers


Standard sea-worthy packaging or as buyers' requirement.


We have professional and strictly producing control system as below:

Before Formed pipe : Assurance of compliance

Review of samples certification (MTC)


Chemical analysis, Tension &Mechanical tests, Eddy current testing, Ultrasonic testing

Visual examination, Thickness measurement (Ultrasonic)

Inside/Out Side/Length dimension control, Straightness

Visual & Dimension check of edge


1. Food preparation equipment, especially in chloride environments

2. Chemical processing, equipment

3. Laboratory benches and equipment

4. Rubber, plastics, pulp & paper machinery

5. Pollution control equipment

6. Boat fittings, value and pump trim

7. Heat exchangers

8. Pharmaceutical and textile industries

9. Condensers, evaporators and tanks

Corrosion Resistance:

1. Generally more resistant than 304 in range of atmospheric environments and many corrosive media due to the increased chromium
and molybdenum content.

2. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 122°F (50°C).

3. Considered resistant to potable water with up to about 1000mg/L chlorides at ambient temperatures, reducing to about 500mg/L at
140°F (60°C).

4. Usually regarded as the “marine grade stainless steel” – but is not resistant to warm sea water.

Heat Resistance:

1. Good oxidation resistance in intermittent service to 1600°F (870°C) and in continuous service to 1700°F (925°C)

2. Grade 316L is more resistant to carbide precipitation.

Thanks for your time on us, pls feel free to contact us if you have any questions.  

We would like to response within 12 hours our working time. 



© Copyright 2021 Hyde Industry.